Wuxi Nanya Technology Co., Ltd., founded in 1996, is a high-tech enterprise integrating R&D, manufacturing and sales. It is located on the beautiful shore of the Taihu Lake Lake.
DetailWuxi Nanya Technology Co., Ltd., founded in 1996, is a high-tech enterprise integrating R&D, manufacturing and sales. It is located on the beautiful shore of the Taihu Lake Lake.
DetailWuxi Nanya Technology Co., Ltd., founded in 1996, is a high-tech enterprise integrating R&D, manufacturing and sales. It is located on the beautiful shore of the Taihu Lake Lake.
DetailWuxi Nanya Technology Co., Ltd., founded in 1996, is a high-tech enterprise integrating R&D, manufacturing and sales. It is located on the beautiful shore of the Taihu Lake Lake.
Detail
The slicing mechanism of this device can evenly separate silicon wafers in any state, including those fully bonded with mortar; The technology has been applied for a utility model;
Silicon wafer strip separation principle: This component is the core technology of the device, successfully developed by South Asia and has applied for two inventions. We abandon the conventional method of directly absorbing silicon wafers and instead use water absorption (there is always a certain distance between the silicon wafers and the conveyor belt), so that the separated silicon will move towards the conveyor belt in a non-contact manner along the direction of water flow, without any damage to the silicon wafers. At the same time, this technology has laid the foundation for the use of fully automatic chip insertion machines for ultra-thin (<140mm) silicon wafers, and thick and thin silicon wafers can use the same equipment;
1. Overall dimensions 2220L×1120W×1850H(mm)
2. Flower basket specifications 50, 25 pieces
3. Silicon wafer size 125mm、156mm
4. Wafer thickness 140~200um
5. Suitable for silicon wafers Monocrystalline silicon, Polycrystalline silicon
6. Production capacity > 5000 tablets/hour
7. Fragmentation rate <0.2%
8. Control system PLC programmable controller, AC servo system
9. Pressure 0.4~0.5Mpa drying gas
10. Air source flow rate Intake pipe diameter≥8mm
11.Power supply AC220V(Single phase three wire)、50HZ
12. Power 2.5KW